? rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 1 of 6 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. sf2060b-041807 electrical characteristics characteristic sym notes min typ max units center frequency (fc variation must also be accounted for with an extra 94 khz due to crystal variation 40 ppm at the lo frequency) f c 1 115.18 mhz insertion loss (all bw specifications are a function of fc variation) 14 16.2 db amplitude ripple (p-p) between (fc-6.250 mhz to fc-4.3925 mhz) 1.65 db amplitude ripple (p-p) between (fc-4.3925 mhz to fc-2.535 mhz) 1.5 amplitude ripple (p-p) between (fc-2.535 mhz to fc-0.025 mhz) 1.5 amplitude ripple (p-p) between (fc+0.025 mhz to fc+2.535 mhz) 1.6 amplitude ripple (p-p) between (fc+2.5350 mhz to fc+4.3925 mhz) 1.5 amplitude ripple (p-p) between (fc+4.3925 mhz to fc+6.250 mhz) 1.5 pass bandwidth of -1.5 db 13.5 mhz pass bandwidth of -3 db 14.5 low side attenuation fc < (fc -16.5 mhz) 34 db low side attenuation between: (fc -16.5 mhz)....(fc -10.5 mhz) 32 high side attenuation between: (fc +9.0 mhz)....(fc +16.5 mhz) (-15~85c) 24 high side attenuation between: (fc +9.0 mhz)....(fc +16.5 mhz) (-40~-15c) 18 high side attenuation fc > (fc +16.5 mhz) 33 temperature coefficient of frequency -18 ppm/c delay ripple (p-p) between (fc-6.250 mhz to fc-4.3925 mhz) sat1a 150 ns (fc-4.3925 mhz to fc-2.535 mhz) sat2a 180 (fc-2.535 mhz to fc-0.025 mhz) tera 120 (fc+0.025 mhz to fc+2.535 mhz) terb 120 (fc+2.535 mhz to fc+4.3925 mhz) sat2b 120 (fc+4.3925 mhz to fc+6.25 mhz) sat1b 120 operating temperature range t a 1 -40 +85 c differential input and output impedance l & c match to 200 ohms case style 6 smp-03-s 7 x 5 mm nominal footprint lid symbolization (yy=year, ww=week, s=shift) see note 4 rfm sf2060b=1 yywws smp-03-s ? designed for sdars receiver if application ? low insertion loss ? 5.0 x 7.0 mm surface-mount case ? differential input and output ? complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum incident power in passband +10 dbm max. dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +85 c suitable for lead-free soldering - max soldering temperature 260c for 30 s 115.18 mhz saw filter SF2060B-1 notes: 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 w and measured with 50 w network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nom- inal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the pass- band. rejection in final user application is dependent on pcb layout and exter- nal impedance matching design. see application note no. 42 for details. 4. the design, manufacturing process, and specifications of this filter are subject to change. 5. tape and reel standard per ansi / eia 481. 6. us and international patents may apply. 7. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. 8. ?copyright 1999, rf monolithics inc. electrostatic sensitive device. observe precautions for handling. pb www.datasheet.net/ datasheet pdf - http://www..co.kr/
115.18 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 2 of 6 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. sf2060b-041807 ch1 s 21 log mag 10 db/ ref -14 db center 115.180 000 mhz span 40.000 000 mhz sf2060b demo -3 db passband cor prm 28 jun 2005 13:28:38 1 2 3 4 1_: 0 db 0.000 000 mhz ref=1 bw: 14.458 108 mhz cent: 115.170504 mhz q: 7.9658 1_ loss: -14.063 db ch1 s 21 log mag 1 db/ ref -14.8 db center 115.180 000 mhz span 40.000 000 mhz sf2060b demo amp. ripple and delay cor prm ch2 s 21 delay ref 700 ns 50 ns/ cor smo prm 28 jun 2005 13:27:09 2 3 3_:-.6919 db 12.500 000 mhz ref=2 mean:-14.269 db s.dev: .2391 db p-p: 1.053 db 2 3 3_ -44.365 ns 12.500 000 mhz ref=2 mean: 702.56 ns s.dev: 11.786 ns p-p: 64.621 ns www.datasheet.net/ datasheet pdf - http://www..co.kr/
115.18 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 3 of 6 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. sf2060b-041807 ch1 s 11 log mag 5 db/ ref 0 db center 115.180 000 mhz span 40.000 000 mhz sf2060b demo return loss cor prm ch2 s 22 log mag ref 0 db 5 db/ cor prm 28 jun 2005 13:22:58 1 2 3 1_:-26.965 db 115.180 000 mhz 2_:-7.56 db 108.93 mhz 3_:-6.3919 db 121.43 mhz 1 2 3 1_ -25.658 db 115.180 000 mhz 2_ -6.6543 db 108.93 mhz 3_ -7.6705 db 121.43 mhz ch1 s 11 1 u fs center 115.180 000 mhz span 40.000 000 mhz sf2060b demo matched to 200 ohms cor prm ch2 s 22 1 u fs cor prm 28 jun 2005 13:20:47 1 1_: 45.77 -820.31 m 1.6845 nf 115.180 000 mhz 1 1_ 46.891 3.9805 5.5002 nh 115.180 000 mhz www.datasheet.net/ datasheet pdf - http://www..co.kr/
115.18 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 4 of 6 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. sf2060b-041807 2 0 . 0 m m 47.3 mm www.datasheet.net/ datasheet pdf - http://www..co.kr/
115.18 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 5 of 6 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. sf2060b-041807 smp-03-s case 12-terminal ceramic surface-mount case 5 x 7 mm nominal footprint case dimensions dimension mm inches min nom max min nom max a 6.80 7.00 7.20 0.268 0.276 0.283 b 4.80 5.00 5.20 0.189 0.197 0.205 c 1.65 2.00 0.065 0.079 d 0.80 e 2.41 2.54 2.67 0.095 0.100 0.105 h 0.87 1.1 1.13 0.034 0.039 0.044 j 2.54 k 2.87 3.00 3.13 0.113 0.118 0.123 p 1.14 1.27 1.40 0.045 0.050 0.055 materials solder pad termination au plating 30 - 60 inches (76.2-152 m) over 80- 200 inches (203-508 m) ni. lid fe-ni-co alloy electroless nickel plate (8-11% phosphorus) 100-200 inches thick body al 2 o 3 ceramic pb free pb www.datasheet.net/ datasheet pdf - http://www..co.kr/
115.18 mhz saw filter rf monolithics, inc. phone: (972) 233-2903 fax: (972) 387-8148 e-mail: info@rfm.com page 6 of 6 rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo are registered trademarks of rf monolithics, inc. sf2060b-041807 tape and reel specifications ?b ? nominal size quantity per reel inches millimeters 7 178 500 13 330 2000 user direction of feed component orientation and dimensions carrier tape dimensions ao 5.5 mm bo 7.5 mm ko 2.0 mm pitch 8.0 mm w 16.0 mm pin #1 see detail "a" 13.0 20.2 2.0 12.0 100 ref. "b" ref. 16.0 www.datasheet.net/ datasheet pdf - http://www..co.kr/
|
